Automotive Crankshafts, Part 3 – Typical Mass Finishing Machines Used for Crankshafts
, roslerusa - Volver a la vista general
Crankshafts are an integral automotive component. Utilized to convert piston movement into rotational motion, these work pieces must provide reliable stability and withstand tensile, compressive, and shear stresses.
Rosler Metal Finishing has extensive experience finishing crankshafts and other automotive work pieces with specially designed shot blasting and mass finishing equipment.
Let’s take a closer look at mass finishing
machines offering outstanding processing for crankshafts.
Typical Machines
Built with specific work pieces in mind, Rosler designs
several machines to process crankshafts and other automotive work pieces.
Due to their considerable size and weight, the only mass finishing machines capable of handling the deburring of crankshafts after machining are mid- to large-sized tub vibrators or linear, continuous flow vibrators.
Selecting one machine type over the other largely
depends on the work piece’s size.
Tub Vibrators
These machines are ideal for processing a wide range of crankshafts, from light-weight small work pieces to those weighing more than 500 lbs, with lengths of up to 20 ft (6,100 mm) or diagonal cross sections of 3.3 ft (1,000 mm).
Rosler Tub Vibrator
Because of the size of the work pieces they
accommodate, tub vibrators require time consuming and costly manual loading and
unloading of the work pieces. That is why their use is limited to relatively
low production volumes.
Linear, Continuous Flow
Vibrators
For high-volume production, fully or partially
automated linear, continuous flow vibrators are the ideal solution. These
machines can handle large volumes of crankshafts with lengths of approximately
12 to 30 ft.
The use of robots or handling devices like gantry systems for loading and unloading allows fully automatic operation.
Rosler DA Linear Continuous Flow Vibrator
DA linear, continuous flow vibrators can handle
the deburring of small- to mid-sized crankshafts at cycle times of less than
one minute per part, more than 60 parts/hour.
They can be directly linked to the preceding
machining operation and the subsequent washing process.
The Rosler Way
Rosler has more than 80 years of experience in surface finishing. Trust us to provide mass finishing solutions to your unique automotive work pieces and challenges. Contact us and we will help you find a better way.
The complete Automotive Series includes:
- Part 1 – Cost-Effective Surface Improvement for Key Engine Components.
- Part 2 – Shot Blasting Machines Designed for Crankshafts.
- Part 3 – Typical Mass Finishing Machines Used for Crankshafts.
Sign up for enews alerts to be notified of all Rosler blog posts!
GalerÃa
